Manufactured Home For Sale

The Re-Flooring Process in Mobile Homes

Manufactured Home For Sale
Mobile Home Re-Flooring

Today’s new manufactured homes are constructed after consulting the alternate floor plans processed by the mobile home manufacturer. When buying the manufactured home for sale, the floor plan highlights layout specifics to the homeowners who are interested in buying the property. Different layouts are used in manufactured housing, meaning both conventional as well as contemporary are common here, and homeowners tend to re-floor only when they notice leakages inside their small mobile homes.

The process of re-flooring is done especially when moisture occurs inside the manufactured homes interior. On the other hand, the best manufactured homes use Oriented Strand Board to keep the moisture within. This is why, in manufactured housing segment, re-flooring is a difficult practice to pull off at one-go by a single worker. It can be a task especially for the home renovator who expertly tightens up the joists on new manufactured homes. Below are the ways in which manufacturers and renovators re-floor small manufactured homes in a perfect manner.

The renovators use generic manufactured housing tools to begin the floor plan revamp works. Circular saw, for instance, helps gauge the depth of the gaps beneath and above the manufactured home for sale. The contractor checks the floor plan initially and measures the floor thickness just so a renovator’s task would be somewhat easier in an older mobile home. In addition to the fastening work, using insulation and adhesives tightens up the joists in small mobile homes that are contemporary.

Steps to Redo the Small Mobiles Home Floor Plan

The first step to get the new manufactured homes’ floor revamped is to remove the trims and the vinyl coating down under. In fact, if the floor has mere carpets, the renovator would have to remove the strips laid by the mobile home manufacturer only. Vinyl can be cut around the edges and the tiles ripped apart gradually, depending on the quality of work done by the mobile home manufacturer. Further, if a leakage has caused due to some other reason, finding and repairing the same would add to the best manufactured homes’ appeal.

The second step is perhaps the most time-consuming process in manufactured housing segment. To put it mildly, renovators would have to fit the circular saw as per the joists that are used to fasten small mobile homes. The renovator dwells on the floor edges, silently bettering the manufactured home for sale pitch. In fact, as mobile homes come in different sizes, it makes the second step somewhat difficult to execute.

The third is to concentrate on the sub-floor paved by the mobile home manufacturer. The edge of the floor can sometimes be hard to access on new manufactured homes, so renovators would have to nail it down skillfully. Further, they make it a point to evade the sawdust on wooden floors and keep plumbing as it was in the beginning. If the sub-floor is inaccessible underneath the manufactured home, renovators would accordingly use sharp tools for the work.

The fourth step is inspecting throughout the floor as a means to reinforce the small mobile homes’ plumbing work. If leakages exist, adding an additional 2 x 4 insulation would conceal the leaks in the manufactured home flooring. Reinforced steel is commonly used in manufactured housing as a means to strengthen the plumbing module. After the inspection, they ensure that wires and pipes are clearly visible to the naked eye.

The fifth step is to resume the re-floor works so much that the manufactured home for sale gets a revamped look. The sub-floor would be paved in the same direction as of the original, opposite the fastened joists in new manufactured homes. Plywood is used as a drop-in fit in conventional manufactured housing and the joists are left somewhat scattered.

The sixth step is to level the subfloor with adhesives, preferably glue, and assumingly the same as that used in the best manufactured homes. This is where renovators place the Oriented Strand Board to continue the revamp works on the floor of new manufactured homes. During the ongoing process, renovators tend to cut open the plywood and joists to sandwich the Oriented Strand Board. This type of flooring method is renowned among the builders dealing in best manufactured homes and in the manufactured housing in general as well.

Being the penultimate step, renovators get to the bathroom floor to revamp the manufactured home for sale pitch. The renovators would not need to check spoilage as bathroom floors are tiled conventionally, precision-tiled. In fact, in manufactured housing, anything that prevents water spoilage is worth the look in including the vinyl bathroom.

Finally, renovators pave the new floor on an even-keel to improve the manufactured homes’ interior. Every little addition to the original floor plan would help the manufactured home for sale pitch.

Why is Re-Flooring Essential in Manufactured Housing?

New Manufactured Homes
Mobiles Home Floor Plan

Flooring methods would add to the interior appeal of the small mobile homes. However, sub-floors made of particles used a sponge in old manufactured housing instead of the Oriented Strand Board. Even some amount of water leakage would necessitate re-flooring if went unnoticed. A mobile home manufacturer, in a way, covers the protecting of the dwelling from outside weather, and homeowners need to check spoils on the original floor based on the weather-resistance of their respective home.

In new manufactured homes that are prepared to perfection with adherence to the HUD codes, re-flooring is a once in a blue moon formality. The best manufactured homes are built as per the homeowners’ specifications, inspected on and off by experienced mobile home manufacturers and factory workers first, and evaluated by the general contractor.

Popular Usages in the Mobile Home Segment

The floor plan is one of the terms you would regularly hear in the manufactured home industry. Other terms include small mobile homes that are towed on wheels, the best manufactured homes having quality steel frame, manufactured home for sale having skylights and vents, etc. Once the homeowners and the mobile home manufacturer come to terms on the design and model, a budget and expense pitch in terms of the size aspect is discussed.

Nowadays, there is absolutely no room for damages in the manufactured home industry, which could curb the external appeal of the home for longer periods. Gone are the days wherein a mobile home manufacturer constantly recycled conventional norms to improve manufactured home for sale pitch. The modern mobile home is assembled in an advanced and controlled factory environment.